Hello,
i measure the voltage between the GND and VCC pads on the RFM12B socket.
3.25v is that ok?
emonTx Voltage Check
Submitted by Guest on Tue, 19/02/2013 - 15:06»
Archived Forum |
|
emonTx Voltage CheckSubmitted by Guest on Tue, 19/02/2013 - 15:06Hello, i measure the voltage between the GND and VCC pads on the RFM12B socket. 3.25v is that ok?
» |
Re: emonTx Voltage Check
It should be OK. It should be 3.3 V +/- typically 0.4% but the limit tolerance is 3%. So it is well within specification. The MCP1702 data sheet has all the details.