NanodeRF hangs again :-(

Submitted by Guest on Tue, 06/11/2012 - 19:32

Hello all, as first sorry for my english.

Have soldered emontx and nanodeRF succesfully, measures was ok.

I'm using EmonTx with 3 Ct's and 1 ac Adapter, all was perfectly configured and calibrated.

On the nanodeRF i'm using the "NanodeRF_Power_RTCrelay_GLCDtemp" Sketch.

On it i have setted the Node and 10 and group 210.

Created my feeds on your site.

All was working perfectly for the last 7 Days, the red Led on the NanodeRF was flash every second.

This Evening hang the NanodeRF, the Red Led light costantly, message where sent equally to emoncm, but every 20 or 30 sec. the nanode generate a reset (watchdog?).

i have an Uno Bootloader on the Nanode Controller.

Have tryed to reset (switch off), emontx,nanodeRf, Router.

Any hekp for this Issue ?

here a stamp of the Serial

Greetings

Remo

-------------------------------------

[webClient]
DHCP status: 1
IP: 192.168.1.11
GW: 192.168.1.1
DNS: 8.8.8.8
DNS status: 1
SRV: 213.138.101.177
Data sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:1}
OK recieved

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:502,power2:357,power3:268,voltage:225}
Time request sent
Time: t20,29,37

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:497,power2:361,power3:269,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:463,power2:380,power3:264,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1706,power2:1558,power3:1628,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1748,power2:1589,power3:1641,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1719,power2:1570,power3:1645,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1732,power2:1556,power3:1639,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1702,power2:1554,power3:1637,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1693,power2:1539,power3:1613,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1713,power2:1511,power3:1615,voltage:226}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1721,power2:1518,power3:1617,voltage:225}

[webClient]
DHCP status: 1
IP: 192.168.1.11
GW: 192.168.1.1
DNS: 8.8.8.8
DNS status: 1
SRV: 213.138.101.177
Data sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:1}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1733,power2:1540,power3:1636,voltage:225}
Time request sent

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1737,power2:1552,power3:1630,voltage:225}

emonTx data rxData sent: /api/post.json?apikey=2306d139d22a5f30bcae1944615d018b&json={rf_fail:0,power1:1727,power2:1549,power3:1633,voltage:226}

------------------------------------------

Re: NanodeRF hangs again :-(

Submitted by remino (not verified) on Thu, 08/11/2012 - 18:45.

bah.....

Re: NanodeRF hangs again :-(

Submitted by Robert Wall on Fri, 09/11/2012 - 15:28.

? ? ?

I have never yet got a NanodeRF to work successfully using DNS.

Re: NanodeRF hangs again :-(

Submitted by mad_dad on Wed, 14/11/2012 - 22:07.

I use the NanodeRF to send data to COSM from 2 emontx senders

DHCP status: 1
IP: 192.168.0.2
GW: 192.168.0.1
DNS: 192.168.0.1
DNS status: 1
SRV: 64.94.18.121
emonTx2 data rx
send CSV data
rf_fail2,0
panel1,35.12
panel2,34.00
panel3,33.00
tank1,40.00
tank2,41.00
wood,37.00

Server Reply
ok recv from server | Date: Wed, 14 Nov 2012 20:59:14 GMT

emonTx1 data rx
send CSV data
rf_fail1,0
power1,798
power2,0
diff,-798
volts,16401

but the NanodeRF script behaves weird is i add condition code between adding power2 to str and volts to str. Currently i have the diff of power 2 and power1 but wanted to have export and import but this causes it to reset continuously. Not sure if it is taking too long or there is a buffer overflow.

Hope that makes sense

Re: NanodeRF hangs again :-(

Submitted by ukmoose on Wed, 14/11/2012 - 23:56.

Mad_dad,

I'm confused, is your issue related to the posts above it? Or are you looking for people to help solve your problem?

If its a problem of your own, could you help by starting a new post?

You can do thus by clicking on create content in the section under your username on the righthand side.

Re: NanodeRF hangs again :-(

Submitted by jrobbie (not verified) on Thu, 15/11/2012 - 16:31.

I didn't have much luck posting to Cosm when I compiled my code using Arduino 1.0.1 - even after updating the call to reflect the new library changes.

The short answer was that I switched back to the Arduino 1.0 code and my sketch based on "NanodeRF_Power_RTCrelay_GLCDtemp" runs fine to Cosm and has done so for some months.

Interestingly, I can run much the same sketch to emonCMS using the "ether.browseUrl" if I compile with Arduino 1.0.1 and it works ok.

I think that there maybe something wrong with the libraries when using "ether.httpPost" since the upgrade to 1.0.1

John

Re: NanodeRF hangs again :-(

Submitted by TrystanLea on Thu, 15/11/2012 - 17:42.

Remino, I wonder have things improved at all recently, I removed something which was causing a high overhead on the emoncms.org server which might improve things. Another thing to try is to remove the time request line 221 to 228.

Archived Forum