Archived Forum

now a bit later it has saved the 2 feeds... 

could it be that it does not save at 1 min interval as it should?

How often is it saving for you? It should be every 1 minute, how often is your data coming in?

have not noted how often it saves.... data comes every 5 sec from node

came to mind that the problem was that it stopped saving, even if i deleted the feeds and created them again... not even reboot helped... and last time it must have taken at least 30 mins before it worked... 

what could prevent it from saving?

and is there an easy way to clear all what is saved without the need to delete the feeds? i plan to wipe saved data once i get the water meter on the system too...

i  created a -input to try and log the difference between the feed value and the value at the last reading to get the diff between readings...

that did not work and it stopped updating all inputs and also the feeds

i had to clear some of the inputs to get it going again

i then cleared all the feeds and created them again to start fresh...

now it does not save the feeds again and i wait more than 5 mins....

what makes it stop saving? and when it starts to save is there a command that can clear the datapoints so i can clear out old test data without touching the setup as such?

it seems that a reboot and click on refresh feed size does teh trick... not sure thou

funny thing...

http://energymonitor-dk.dns4e.net/emoncms/boelle/heat

if you look at the graphs and click daily they now show data before i created the feeds.... how can that be?