I just tried to swap from v2 to v3 hardware but the inputs are not in the same order. ie. voltage is coming up on the old ct2 input field and ct3 data is coming in on the original voltage field etc.
Is there a way of rearranging the inputs such as editing the key numbers on the input page?
I'm using emoncms v8.01 on rpi with emonTxV3_continuous_kwhtotals_noeeprom firmware on the emontx.
Re: changed from emontx v2 to v3 now inputs jumbled up
The easiest way is to delete your 'log to Feed' process within your input page, and add a new 'log to feed' process directing the input to your correct & respective feed.
The alternative is to re-program the emontx v3 to send the cvs string in a different order, as the keys are assigned by emoncms in the order that the data is received.
Paul
Re: changed from emontx v2 to v3 now inputs jumbled up
I was hoping I wouldn't have to re-input all the log to feed processes as there is loads of them. I'll look into reprogramming the emontx v3 first.
Re: changed from emontx v2 to v3 now inputs jumbled up
It's only deleting one process and adding one process per input, you won't lose your other processes or existing feed data, but whichever option you feel most comfortable with.
Paul
Re: changed from emontx v2 to v3 now inputs jumbled up
I've just found that I can edit the key number on the input page in v8.01 by clicking on the pen icon. This re-arranges the processes . I'll try it out tomorrow but it looks as though this will solve the problem.
Re: changed from emontx v2 to v3 now inputs jumbled up
If you go down the route of editing the key numbers don't do it to a live node. be sure to power down the node in question as it gets quite confusing if emoncms tries to re allocate keys because it received a packet when you're mid edit :-)