After adding second emonTX and some four 1-wire temperature sensors to emonTX the emonGLCD has started to hang up periodically after some 12 hours or so. Now noticed that the emonGLCD had also posted 16 nodes to emoncms, and I only have one one wire sensor installed there. When the emonGLcD hangs also the data feed from emonGLCD and also of one emonTX stops, i.e. Emoncms shows timeout for all these sensors from in my case node11 (emonTX 2) and node20 (emonGLCG). maybe emonGLCD can not handle data structures which dies not have identical lenght ? Any good advice appre
EmonGLCD posts 16 nodes ??.
Submitted by Petrik on Wed, 24/10/2012 - 20:28After adding second emonTX and some four 1-wire temperature sensors to emonTX the emonGLCD has started to hang up periodically after some 12 hours or so. Now noticed that the emonGLCD had also posted 16 nodes to emoncms, and I only have one one wire sensor installed there. When the emonGLcD hangs also the data feed from emonGLCD and also of one emonTX stops, i.e. Emoncms shows timeout for all these sensors from in my case node11 (emonTX 2) and node20 (emonGLCG). maybe emonGLCD can not handle data structures which dies not have identical lenght ? Any good advice appre
ciated.