Received my brand new emonBase (vlow-write-v8.5). So let's go.
Plug, enable wifi, update from browser.
Fine, here is the log (may be you could enable the Code widget in the forum Ckeditor?)
Filesystem is unlocked - Write access type ' rpi-ro ' to lock Stopping system emonPiLCD daemon:start-stop-daemon: warning: failed to kill 2397: No such process No process in pidfile '/var/run/emonPiLCD.pid' found running; none killed. failed! I2C LCD NOT DETECTED Starting emonPi Update > Wed Feb 10 21:02:01 UTC 2016 git pull /home/pi/emonpi Already up-to-date. git pull /home/pi/RFM2Pi Already up-to-date. git pull /home/pi/emonhub Already up-to-date. git pull /home/pi/oem_openHab /home/pi/emonpi/update: line 47: cd: /home/pi/oem_openHab: No such file or directory Already up-to-date. git pull /home/pi/oem_node-red /home/pi/emonpi/update: line 51: cd: /home/pi/oem_node-red: No such file or directory Already up-to-date. git pull /home/pi/usefulscripts /home/pi/emonpi/update: line 55: cd: /home/pi/usefulscripts: No such file or directory Already up-to-date. git pull /home/pi/backup /home/pi/emonpi/update: line 59: cd: /home/pi/backup: No such file or directory Already up-to-date. Start emonPi Atmega328 firmware update: ================================= EmonPi update started ================================= Stopping OpenEnergyMonitor emonHub: emonhub has been stopped ok. Start ATmega328 serial upload using avrdude with emonPi_latest.hex avrdude-original: Using autoreset DTR on GPIO Pin 7 avrdude-original: stk500_getsync(): not in sync: resp=0xe0 Start emonhub update script: ================================= EmonPi update started ================================= Running emonhub automatic node addition script [[5]] Node 5 already present Start emoncms update: ================================= Emoncms update started Wed Feb 10 21:02:28 UTC 2016 git pull /var/www/emoncms * low-write Already up-to-date. git pull /var/www/emoncms/Modules/nodes * master Already up-to-date. git pull /var/www/emoncms/Modules/app * master Already up-to-date. git pull /var/www/emoncms/Modules/config * master Already up-to-date. git pull /var/www/emoncms/Modules/wifi * master Already up-to-date. git pull /var/www/emoncms/Modules/dashboard * low-write Already up-to-date. Copy new default.emonpi.settings.php to settings.php & make backup old.emonpi.settings.php Restarting OpenEnergyMonitor emonHub: emonhub has been restarted ok. Log is turned off Restarting emoncms-nodes Log is turned off Restarting feedwriterJob is already running! sudo: /etc/init.d/openhab: command not found Emoncms update finished ================================= Start emonPi LCD service Starting system emonPiLCD daemon:. ................... emonPi update done Wed Feb 10 21:03:32 UTC 2016 Filesystem is locked - Read Only access type ' rpi-rw ' to unlock
2016-2-10 21:07:24 MQTT INFO Reloading config 2016-2-10 21:07:30 MQTT INFO Reloading config 2016-2-10 21:07:36 MQTT INFO Reloading config 2016-2-10 21:07:42 MQTT INFO Reloading config 2016-2-10 21:07:48 MQTT INFO Reloading config 2016-2-10 21:07:54 MQTT INFO Reloading config 2016-2-10 21:08:00 MQTT INFO Reloading config 2016-2-10 21:08:02 FEEDWRITER INFO PHPTimeSeries bytes written: 0 2016-2-10 21:08:02 FEEDWRITER INFO PHPFina bytes written: 0 2016-2-10 21:08:06 MQTT INFO Reloading config 2016-2-10 21:08:12 MQTT INFO Reloading config 2016-2-10 21:08:18 MQTT INFO Reloading config 2016-2-10 21:08:24 MQTT INFO Reloading config 2016-2-10 21:08:30 MQTT INFO Reloading config 2016-2-10 21:08:36 MQTT INFO Reloading config 2016-2-10 21:08:42 MQTT INFO Reloading config 2016-2-10 21:08:48 MQTT INFO Reloading config 2016-2-10 21:08:54 MQTT INFO Reloading config 2016-2-10 21:09:00 MQTT INFO Reloading config 2016-2-10 21:09:02 FEEDWRITER INFO PHPTimeSeries bytes written: 0 2016-2-10 21:09:02 FEEDWRITER INFO PHPFina bytes written: 0 2016-2-10 21:09:06 MQTT INFO Reloading config 2016-2-10 21:09:12 MQTT INFO Reloading config 2016-2-10 21:09:18 MQTT INFO Reloading config 2016-2-10 21:09:24 MQTT INFO Reloading config 2016-2-10 21:09:30 MQTT INFO Reloading config 2016-2-10 21:09:36 MQTT INFO Reloading config 2016-2-10 21:09:42 MQTT INFO Reloading config 2016-2-10 21:09:48 MQTT INFO Reloading config 2016-2-10 21:09:54 MQTT INFO Reloading config
Tried to delete all nodes but 5, from browser button and from emonhub.conf without more succes...
Here is my emonhub.conf
#######################################################################
####################### emonhub.conf #########################
#######################################################################
###
### SPECIMEN emonHub configuration file
### Note that when installed from apt, a new config file is written
### by the debian/postinst script, so changing this file will do
### nothing in and of itself.
###
### Each Interfacer and each Reporter has
### - a [[name]]: a unique string
### - a type: the name of the class it instantiates
### - a set of init_settings (depends on the type)
### - a set of runtimesettings (depends on the type)
### Both init_settings and runtimesettings sections must be defined,
### even if empty. Init settings are used at initialization,
### and runtime settings are refreshed on a regular basis.
### Many settings below are "commented out" as they are not mandatory and
### have been included as a template or to provide alternative options
### removing the leading # will enable the setting and override the default
### Default settings are shown as comments on the same line as the setting
### eg #(default:xyz) "xyz" is set if the setting is "commented out".
###
### All lines beginning with '###' are comments and can be safely removed.
###
#######################################################################
####################### emonHub settings #######################
#######################################################################
### List of nodes by node ID
### 'datacode' is default for node and 'datacodes' are per value data codes.
### if both are present 'datacode' is ignored in favour of 'datacodes'
### eg node 99 would expect 1 long and 4 ints, unless the "datacodes" line
### was removed, then "datacode" would make it expect any number of longs,
### likewise per value "scales" will override default node "scale", the number
### of "scales" must match the number of values or frame will be discarded.
Nodes inactives
Submitted by leodm on Wed, 10/02/2016 - 21:13Received my brand new emonBase (vlow-write-v8.5). So let's go.
Plug, enable wifi, update from browser.
Fine, here is the log (may be you could enable the Code widget in the forum Ckeditor?)
Filesystem is unlocked - Write access type ' rpi-ro ' to lock Stopping system emonPiLCD daemon:start-stop-daemon: warning: failed to kill 2397: No such process No process in pidfile '/var/run/emonPiLCD.pid' found running; none killed. failed! I2C LCD NOT DETECTED Starting emonPi Update > Wed Feb 10 21:02:01 UTC 2016 git pull /home/pi/emonpi Already up-to-date. git pull /home/pi/RFM2Pi Already up-to-date. git pull /home/pi/emonhub Already up-to-date. git pull /home/pi/oem_openHab /home/pi/emonpi/update: line 47: cd: /home/pi/oem_openHab: No such file or directory Already up-to-date. git pull /home/pi/oem_node-red /home/pi/emonpi/update: line 51: cd: /home/pi/oem_node-red: No such file or directory Already up-to-date. git pull /home/pi/usefulscripts /home/pi/emonpi/update: line 55: cd: /home/pi/usefulscripts: No such file or directory Already up-to-date. git pull /home/pi/backup /home/pi/emonpi/update: line 59: cd: /home/pi/backup: No such file or directory Already up-to-date. Start emonPi Atmega328 firmware update: ================================= EmonPi update started ================================= Stopping OpenEnergyMonitor emonHub: emonhub has been stopped ok. Start ATmega328 serial upload using avrdude with emonPi_latest.hex avrdude-original: Using autoreset DTR on GPIO Pin 7 avrdude-original: stk500_getsync(): not in sync: resp=0xe0 Start emonhub update script: ================================= EmonPi update started ================================= Running emonhub automatic node addition script [[5]] Node 5 already present Start emoncms update: ================================= Emoncms update started Wed Feb 10 21:02:28 UTC 2016 git pull /var/www/emoncms * low-write Already up-to-date. git pull /var/www/emoncms/Modules/nodes * master Already up-to-date. git pull /var/www/emoncms/Modules/app * master Already up-to-date. git pull /var/www/emoncms/Modules/config * master Already up-to-date. git pull /var/www/emoncms/Modules/wifi * master Already up-to-date. git pull /var/www/emoncms/Modules/dashboard * low-write Already up-to-date. Copy new default.emonpi.settings.php to settings.php & make backup old.emonpi.settings.php Restarting OpenEnergyMonitor emonHub: emonhub has been restarted ok. Log is turned off Restarting emoncms-nodes Log is turned off Restarting feedwriterJob is already running! sudo: /etc/init.d/openhab: command not found Emoncms update finished ================================= Start emonPi LCD service Starting system emonPiLCD daemon:. ................... emonPi update done Wed Feb 10 21:03:32 UTC 2016 Filesystem is locked - Read Only access type ' rpi-rw ' to unlock
BUT... all nodes are inactives.
Log emonhub
2016-02-10 21:06:58,855 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 4 0 97 205 105 58 86 47 209 209 156 147 132 6 148 205 101 190 224 71 237 (-98) 2016-02-10 21:07:08,424 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 172 52 187 202 209 148 130 126 3 4 123 29 250 89 250 130 40 107 75 208 164 (-98) 2016-02-10 21:07:09,539 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 63 75 55 186 198 124 195 184 218 206 193 78 61 140 120 36 32 66 210 84 101 (-96) 2016-02-10 21:07:14,859 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 173 162 199 100 66 240 102 65 236 122 150 23 229 240 50 118 190 4 142 26 80 (-98) 2016-02-10 21:07:15,065 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 36 132 18 22 108 125 26 110 249 233 160 248 217 253 127 214 151 34 4 217 121 (-100) 2016-02-10 21:07:15,568 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 156 146 203 139 51 229 (-103) 2016-02-10 21:07:20,087 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 32 134 27 179 72 68 75 0 153 33 18 37 40 6 77 18 88 124 163 22 151 (-95) 2016-02-10 21:07:24,106 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 10 191 176 60 131 128 64 3 190 80 114 2 7 58 118 73 139 233 169 60 125 (-91) 2016-02-10 21:07:26,016 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 36 115 140 221 13 153 129 202 26 198 203 142 57 16 165 115 144 118 77 (-100) 2016-02-10 21:07:27,528 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 161 207 65 226 217 57 125 174 228 85 223 156 152 99 58 5 182 78 110 234 215 (-98) 2016-02-10 21:07:32,363 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 153 48 6 123 114 122 172 29 196 148 126 214 253 220 119 147 79 232 252 155 159 (-98) 2016-02-10 21:07:33,874 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 186 211 96 30 43 205 219 128 213 228 218 89 3 39 7 78 75 49 3 69 0 (-98) 2016-02-10 21:07:34,685 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 21 231 193 238 193 143 24 22 51 120 255 56 230 142 102 94 75 126 114 26 143 (-110) 2016-02-10 21:07:35,193 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 59 134 39 91 108 98 7 14 141 78 5 247 73 124 197 81 222 59 175 148 230 (-97) 2016-02-10 21:07:41,618 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 9 111 83 18 233 75 176 254 128 137 61 67 66 115 3 230 178 225 109 184 5 (-99) 2016-02-10 21:07:41,926 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 38 11 17 194 169 184 13 126 147 174 19 222 143 22 246 50 72 66 145 151 179 (-98) 2016-02-10 21:07:43,740 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 180 133 27 207 139 16 25 232 99 139 175 233 178 100 22 238 212 209 219 153 243 (-99) 2016-02-10 21:07:50,265 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 143 205 10 25 146 228 35 59 57 214 167 199 194 125 54 110 61 87 255 67 244 (-101) 2016-02-10 21:08:02,512 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 14 205 85 5 158 248 253 249 192 197 128 153 32 83 120 77 152 6 167 162 244 (-100) 2016-02-10 21:08:06,042 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 56 232 42 166 238 168 202 112 203 164 35 236 145 119 225 173 239 112 81 1 15 (-98) 2016-02-10 21:08:16,386 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 1 149 201 186 48 227 57 124 76 47 141 167 237 45 151 17 122 120 31 4 47 (-103) 2016-02-10 21:08:17,296 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 153 46 17 148 81 77 185 36 204 235 111 75 230 89 152 0 17 151 246 200 90 (-100) 2016-02-10 21:08:17,906 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 167 148 61 217 224 219 27 19 27 146 25 31 185 215 224 124 56 11 65 209 95 (-87) 2016-02-10 21:08:23,249 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 197 71 209 115 147 161 128 100 157 2 136 154 108 75 177 178 2 35 23 240 66 (-99) 2016-02-10 21:08:25,965 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 2 118 141 233 60 167 226 222 221 32 202 235 17 26 142 128 130 6 27 112 185 (-97) 2016-02-10 21:08:28,079 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 141 48 239 247 4 28 51 241 210 122 117 202 22 50 98 154 88 125 56 184 149 (-95) 2016-02-10 21:08:36,313 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 173 173 255 135 178 101 9 228 63 105 165 180 44 157 166 117 176 (-98) 2016-02-10 21:08:40,132 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 162 121 255 162 11 191 80 7 76 176 22 176 69 189 255 206 7 58 230 14 177 (-101) 2016-02-10 21:08:40,240 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 163 237 195 182 95 223 13 121 63 252 99 189 59 190 212 129 67 132 233 179 62 (-99) 2016-02-10 21:08:42,555 DEBUG RFM2Pi Discarding RX frame 'unreliable content'? 141 207 76 164 56 153 132 189 134 79 144 248 83 217 191 18 95 54 236 1 46 (-89)
Log emoncms
2016-2-10 21:07:24 MQTT INFO Reloading config 2016-2-10 21:07:30 MQTT INFO Reloading config 2016-2-10 21:07:36 MQTT INFO Reloading config 2016-2-10 21:07:42 MQTT INFO Reloading config 2016-2-10 21:07:48 MQTT INFO Reloading config 2016-2-10 21:07:54 MQTT INFO Reloading config 2016-2-10 21:08:00 MQTT INFO Reloading config 2016-2-10 21:08:02 FEEDWRITER INFO PHPTimeSeries bytes written: 0 2016-2-10 21:08:02 FEEDWRITER INFO PHPFina bytes written: 0 2016-2-10 21:08:06 MQTT INFO Reloading config 2016-2-10 21:08:12 MQTT INFO Reloading config 2016-2-10 21:08:18 MQTT INFO Reloading config 2016-2-10 21:08:24 MQTT INFO Reloading config 2016-2-10 21:08:30 MQTT INFO Reloading config 2016-2-10 21:08:36 MQTT INFO Reloading config 2016-2-10 21:08:42 MQTT INFO Reloading config 2016-2-10 21:08:48 MQTT INFO Reloading config 2016-2-10 21:08:54 MQTT INFO Reloading config 2016-2-10 21:09:00 MQTT INFO Reloading config 2016-2-10 21:09:02 FEEDWRITER INFO PHPTimeSeries bytes written: 0 2016-2-10 21:09:02 FEEDWRITER INFO PHPFina bytes written: 0 2016-2-10 21:09:06 MQTT INFO Reloading config 2016-2-10 21:09:12 MQTT INFO Reloading config 2016-2-10 21:09:18 MQTT INFO Reloading config 2016-2-10 21:09:24 MQTT INFO Reloading config 2016-2-10 21:09:30 MQTT INFO Reloading config 2016-2-10 21:09:36 MQTT INFO Reloading config 2016-2-10 21:09:42 MQTT INFO Reloading config 2016-2-10 21:09:48 MQTT INFO Reloading config 2016-2-10 21:09:54 MQTT INFO Reloading config
Tried to delete all nodes but 5, from browser button and from emonhub.conf without more succes...
Here is my emonhub.conf
#######################################################################
####################### emonhub.conf #########################
#######################################################################
###
### SPECIMEN emonHub configuration file
### Note that when installed from apt, a new config file is written
### by the debian/postinst script, so changing this file will do
### nothing in and of itself.
###
### Each Interfacer and each Reporter has
### - a [[name]]: a unique string
### - a type: the name of the class it instantiates
### - a set of init_settings (depends on the type)
### - a set of runtimesettings (depends on the type)
### Both init_settings and runtimesettings sections must be defined,
### even if empty. Init settings are used at initialization,
### and runtime settings are refreshed on a regular basis.
### Many settings below are "commented out" as they are not mandatory and
### have been included as a template or to provide alternative options
### removing the leading # will enable the setting and override the default
### Default settings are shown as comments on the same line as the setting
### eg #(default:xyz) "xyz" is set if the setting is "commented out".
###
### All lines beginning with '###' are comments and can be safely removed.
###
#######################################################################
####################### emonHub settings #######################
#######################################################################
[hub]
### loglevel must be one of DEBUG, INFO, WARNING, ERROR, and CRITICAL
### see here : http://docs.python.org/2/library/logging.html
loglevel = DEBUG #(default:WARNING)
#######################################################################
####################### Interfacers #######################
#######################################################################
[interfacers]
### This interfacer manages the RFM2Pi module
[[RFM2Pi]]
Type = EmonHubJeeInterfacer
[[[init_settings]]]
com_port = /dev/ttyAMA0
com_baud = 38400
[[[runtimesettings]]]
pubchannels = ToEmonCMS,
subchannels = ToRFM12,
# datacode = B #(default:h)
# scale = 100 #(default:1)
group = 210 #(default:210)
frequency = 433 #(default:433)
baseid = 5 #(emonPi default:5)
quiet = false #(default:true)
calibration = 230V #(UK/EU: 230V, US: 110V)
# interval = 300 #(default:0)
# nodeoffset = 32 #(default:0)
### This interfacer manages the RFM2Pi module
[[MQTT]]
Type = EmonHubMqttInterfacer
[[[init_settings]]]
mqtt_host = 127.0.0.1
mqtt_port = 1883
mqtt_user = emonpi
mqtt_passwd = emonpimqtt2016
[[[runtimesettings]]]
pubchannels = ToRFM12,
subchannels = ToEmonCMS,
basetopic = emonhub/
[[emoncmsorg]]
Type = EmonHubEmoncmsHTTPInterfacer
[[[init_settings]]]
[[[runtimesettings]]]
pubchannels = ToRFM12,
subchannels = ToEmonCMS,
url = http://emoncms.org
apikey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
senddata = 1
sendstatus = 1
#######################################################################
####################### Nodes #######################
#######################################################################
[nodes]
### List of nodes by node ID
### 'datacode' is default for node and 'datacodes' are per value data codes.
### if both are present 'datacode' is ignored in favour of 'datacodes'
### eg node 99 would expect 1 long and 4 ints, unless the "datacodes" line
### was removed, then "datacode" would make it expect any number of longs,
### likewise per value "scales" will override default node "scale", the number
### of "scales" must match the number of values or frame will be discarded.
[[5]]
nodename = emonPi
firmware = emonPi_RFM69CW_RF12Demo_DiscreteSampling.ino
hardware = emonpi
[[[rx]]]
names = power1,power2,power1_plus_power2,Vrms,T1,T2,T3,T4,T5,T6,pulseCount
datacode = h, h, h, h, h, h, h, h, h, h, L
scales = 1,1,1,0.01,0.1,0.1,0.1,0.1,0.1,0.1,1
units = W,W,W,V,C,C,C,C,C,C,p
Thanks in advance for your help, I just need for now to read Rpi temp.