I seem to have accidentally stopped or disabled my EMONCMS.
I have recently started my Emon\PI and had created a number of feeds - a couple for power and two for temperature sensors. If I displayed the feeds. I could seem them as they updated every 10 seconds & all looked good. Today I decided it was time to get them producing useful data and possibly sending the data EOMCMS. I realised that I only wanted to record temperature every 5 minutes. I decided the best approach was to delete the temperature feeds and start again.
From the feed view I selected the 2 temperature feeds and used the "trash can" symbol to delete them. This appeared to work fine. I then noticed that the feeds for power didn't seem to be updating.
I went to the nodes section in emoncms- this displayed teh emonpi ans the other nodes in orange and shows that they were last updated when I deleted the temp feeds. I cannot seem to find anyway of making emonCMS active again!
Can anyone help, please?
I checked the display on the emonPi and it seems to be refreshing the P1 &P2 values.
Thanks in anticipation
Andy E
Re: Help - seem to have stopped EmmonCMS
Things have got more bizarre! Decided the shutdown and restart the emonPi - which I did on the proper way by pressing the reset. Everything appears OK as I watch the restart.
I went the ip address and the feeds are now refreshing! BUT! if I click on "Nodes" I get a blank page.
What now?
Andy