I'm posting to a remote emoncms installation. Locally, I see my feeds update every 5 seconds, but updates are only posted to my remote emoncms every 30 seconds. Does anyone know where I can change this setting? I haven't been looked through the code yet, but I'd have thought this would be quite a common feature to play with and so exposed somewhere in the interface!
Running vlow-write-v8.5, posting to emoncms 8.5.2
Tail of emonhub.log... Here you can see I am showing NEW FRAME every 5 seconds but the INFO emoncmsorg send is only done every 30 seconds.
2015-07-23 20:45:53,402 DEBUG RFM2Pi 1124 NEW FRAME : OK 5 41 1 3 0 44 1 244 97 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (-0)
2015-07-23 20:45:53,406 DEBUG RFM2Pi 1124 Timestamp : 1437680753.4
2015-07-23 20:45:53,406 DEBUG RFM2Pi 1124 From Node : 5
2015-07-23 20:45:53,407 DEBUG RFM2Pi 1124 Values : [297, 3, 300, 250.76000000000002, 0, 0, 0, 0, 0, 0, 0]
2015-07-23 20:45:53,408 INFO RFM2Pi Publishing: emonhub/rx/5/values 297,3,300,250.76,0,0,0,0,0,0,0
2015-07-23 20:45:53,411 DEBUG RFM2Pi 1124 adding frame to buffer => [1437680753, 5, 297, 3, 300, 250.76000000000002, 0, 0, 0, 0, 0, 0, 0]
2015-07-23 20:45:53,412 DEBUG RFM2Pi 1124 Sent to channel' : ToEmonCMS
2015-07-23 20:45:57,210 INFO emoncmsorg sending: http://www.**********
2015-07-23 20:45:57,373 DEBUG emoncmsorg acknowledged receipt with 'ok' from http://www.**********
2015-07-23 20:45:58,383 DEBUG RFM2Pi 1125 NEW FRAME : OK 5 29 1 0 0 29 1 242 97 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (-0)
2015-07-23 20:45:58,387 DEBUG RFM2Pi 1125 Timestamp : 1437680758.38
2015-07-23 20:45:58,387 DEBUG RFM2Pi 1125 From Node : 5
2015-07-23 20:45:58,388 DEBUG RFM2Pi 1125 Values : [285, 0, 285, 250.74, 0, 0, 0, 0, 0, 0, 0]
2015-07-23 20:45:58,389 INFO RFM2Pi Publishing: emonhub/rx/5/values 285,0,285,250.74,0,0,0,0,0,0,0
2015-07-23 20:45:58,391 DEBUG RFM2Pi 1125 adding frame to buffer => [1437680758, 5, 285, 0, 285, 250.74, 0, 0, 0, 0, 0, 0, 0]
2015-07-23 20:45:58,392 DEBUG RFM2Pi 1125 Sent to channel' : ToEmonCMS
2015-07-23 20:46:03,416 DEBUG RFM2Pi 1126 NEW FRAME : OK 5 36 1 0 0 36 1 219 97 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (-0)
2015-07-23 20:46:03,419 DEBUG RFM2Pi 1126 Timestamp : 1437680763.42
2015-07-23 20:46:03,420 DEBUG RFM2Pi 1126 From Node : 5
2015-07-23 20:46:03,421 DEBUG RFM2Pi 1126 Values : [292, 0, 292, 250.51000000000002, 0, 0, 0, 0, 0, 0, 0]
2015-07-23 20:46:03,422 INFO RFM2Pi Publishing: emonhub/rx/5/values 292,0,292,250.51,0,0,0,0,0,0,0
2015-07-23 20:46:03,424 DEBUG RFM2Pi 1126 adding frame to buffer => [1437680763, 5, 292, 0, 292, 250.51000000000002, 0, 0, 0, 0, 0, 0, 0]
2015-07-23 20:46:03,425 DEBUG RFM2Pi 1126 Sent to channel' : ToEmonCMS
Re: Increasing emoncms post rate
Original emonhub has a configurable "send interval" which can be defined in emonhub.conf, the "emon-pi" variant seems to have been hard coded with a 30 second interval, I'm not sure why
Paul
Re: Increasing emoncms post rate
Aha. Well found. Thanks!